Re: [Amel Yacht Owners] Gas struts for fridge/freezer lid and engine hatch


Barry Connor
 

Yes, please send them to me, I always have trouble finding things in the files.


Best
Barry


On Feb 6, 2019, at 17:03, jmkraus jmkraus@... [amelyachtowners] <amelyachtowners@...> wrote:

 

Barry, if you are changing the furler mechanization, you have access to the stem fitting. It's easy to remove. Bill Rouse put a bunch of photos of the new fitting in the files section of the site. I'd be happy to send them directly to you and help you with the project. I had a buddy male .e a new one here in ny and another machine shop in Mayaguez trim it to fit. Let me know. Regards, jeff


Sent from my Sprint Samsung Galaxy S7.

-------- Original message --------
From: "Barry Connor connor_barry@... [amelyachtowners]" <amelyachtowners@...>
Date: 2/6/19 11:49 AM (GMT-04:00)
Subject: Re: [Amel Yacht Owners] Gas struts for fridge/freezer lid and engine hatch

 

Hi Jeff,

Yes, mine is also 6.5mm without the twist. (Just kidding, I feel for you). I remember looking at yours and I immediately checked mine. My boat has been across the pond and back before I bought. Just been around the Med since. I have thought about this and will be very conscious of the pressure on this from now. The replacement furlong systems all have space for a 20mm stem. I just had discussions at the Dusseldorf show with Profurl about this and the answer was to bush out my 6.5mm stem with spacers to upgrade to Profurl and Barmar. AMEL are using Profurl on the new 50 and soon to be released 60. Both of these are now going to be sloops. No more ketch rigs from AMEL. No more 55’s.  No more C-Drive keel propellers either. They both will have a through hull shaft drive.
Regarding the struts. I just spoke to a UK company StrutsDirect, very helpful. Replacement for the galley fridge strut -
 “F-SD02-150” E2. Eye Ends. About £20 but shipping to Sicily is £60. I might get it delivered to friend in UK.

Regards

Barry and Penny
“Lady Penelope II”
AMEL 54. #17
Marina di Ragusa. Sicily


On Feb 6, 2019, at 16:21, jmkraus jmkraus@... [amelyachtowners] <amelyachtowners@...> wrote:

 

It is the fitting protruding thru the deck which the headsail furler mechanization is attached to. It is a vertical stainless fitting with a 3/4 inch pin that secures the bae of the furler mechanization. Mine was 6.5mm amel "modified" the fitting to 20mm soon after #14, my hull#. 



Sent from my Sprint Samsung Galaxy S7.

-------- Original message --------
From: "Barry Connor connor_barry@... [amelyachtowners]" <amelyachtowners@...>
Date: 2/6/19 11:11 AM (GMT-04:00)
Subject: Re: [Amel Yacht Owners] Gas struts for fridge/freezer lid and engine hatch

 

Hi Jeff,


Sorry, I don’t understand your question about the ‘stem’ fitting. Is this on the bow for the furler?

Barry


On Feb 6, 2019, at 15:54, JEFFREY KRAUS jmkraus@... [amelyachtowners] <amelyachtowners@...> wrote:

 

Barry,
I was able to get the strut in Martinique at the refrigeration specialist's store. He had a selection of them. Perhaps you could find one at a similar refrigeration outlet locally.

On a separate subject, I see you are 54 #17. I wonder if your stem fitting is the thin 6.5mm version that my 54 #14 had, or if it was built with the "modified" 20mm fitting that Amel installed in later versions. Could you let me know? I'd like to pin down when the change to the 20mm stem fitting begins.
Thanks.
Best Regards,
Jeff Spirit Amel 54 #14


On Wed, Feb 06, 2019 at 09:46 AM, Barry Connor connor_barry@... [amelyachtowners] wrote:

 

I am wanting to replace the gas strut for the lift up lid on the galley fridge/freezer.

The original unit does not have a maker name - brand name printed on the strut. On the strut and the same for the lift up hatch for the engine compartment is a symbol of what looks like 3 sails in 3 squares.

Does anyone have information on where to get the correct struts. The pressure on the fridge strut is 300N and the overall length is 410mm.

Much appreciate any assistance.

Regards

Barry and Penny
"Lady Penelope II"
Amel 54. #17
Marina di Ragusa   Sicily

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.