Re: Outhaul shaft removal

Jose Venegas <josegvenegas@...>


Mine was probable in the same state as yours  and I tried several ways to get it out without success.  At the end I used the screw of a purchased extractor and had the rest fabricated.  Be careful to protect the thread at the end of the shaft. I used a socket with external diameter just smaller than the shaft. Here are the pix I took. Feel free to reach me if you need additional explanations

Good luck

Ipanema SM2K 278
At Constitution Marian in Boston
and waiting to depart to warmer seas.

Join to automatically receive all group messages.