toggle quoted messageShow quoted text
Thanks for your input. I don’t have to order my anchor right away so I will look forward to hearing your report. It seems from my research so far that the Mantus should be good in weed, I hope so too. The areas of the Med. that we have sailed so far (Sardinia, Sicily, Tunisia) all had sandy areas that we could anchor in amongst the weed. Do you think that there is more weed in the Med as you go further East? Thanks for letting me know that the Spade is not working in the Med. weed. It does not appear that the Spade will fit the Amel anchor hardware either so I think I will take that option off of the list. We hope to be in Eastern Greece and perhaps Turkey next season, it would be great to hear about some of your travels, perhaps we can chat some via email?
On Mar 10, 2019, at 11:12 PM, Gregory Shea <gmshea@...
I have a 20 kg Spade on my Sharki. Works great in sand, useless in (Med) weed. I am taking a 25 kg Mantus with me next month. I hope it can get through the weed because that would really open up Med anchorages. I used the template on the Mantus website to size
it on the roller. It's a bit hokey but better than nothing.
Will report back but that may be too late for you.
Sharki 133 Cap des iles
In eastern Greece for 2019
Thanks for sharing your experience with the Rocna and for the insight on the Chrome Duplex, I had never heard of it until your post. From the research I have done to date it appears that the Rocna would be a big step up in holding from my original
Buegel anchor and it is well proven. The Mantus is an anchor of interest to me as well, mostly because it seems to be unusually reliable in resetting. It can of course be hard to separate the hype from fact so I am still pondering… I am concerned a bit
about how light the shank is on the Mantus.
I am really hoping to hear from another Maramu owner that has used the Mantus to know for sure if it would even fit my boat before I make my final decision but I understand that this anchor has not been around all that long so maybe no one has
tried it yet. The side profile and angle of the plough portion of the anchor is very similar to the Rocna which looks encouraging. The shank is longer in the sizes I am looking at but I think that there should be enough deck space. I have seen the Mantus
on a few Super Maramus and they appear to fit pretty well. If anyone with a Super Maramu would like to comment on what they think of this anchor on their Amel I would sure appreciate the input.
On Mar 10, 2019, at 11:31 AM,
in my experience the Rocna has excellent holding power. I weathered the Medicane in Greece last October with this Anchor (45+ kn winds for several hours) and also used it on a couple of occasion with similar wind speeds.
It sets quite fast within 1-2 m of the drop point. It has some problems on weed, but so has nearly every other anchor.
Yes, I suggested that a stainless steel chain has a much better tendency to stow itself because it is more "slick". But as you pointed out, stainles steel is not stainless steel. While in cold waters like Northern Europe you may do ok with AISI 316 (1.4401)
quality for a while (1.4571 would be better if you anchor often), in the Med and in tropical regions the only material you can use for any prolonged perios without corrosion problems is 1.4462 Chrome Duplex.
Unfortunately it has a price tag 4 times the one of galvanized steel - which did keep me away from it so far ;)