Re: Solar Panel Arches

ngtnewington Newington

Mine is by TechNick in Grenada
No wobbles
No extra bracing required
Weight unknown
Cost  US$7000

SY Amelia Aml 54 -019
One more picture attached from side on

On 15 Mar 2019, at 17:04, Arlo <svplanb@...> wrote:

I used thickwall stainless tubing with lateral supports at the bottom. 400 lb dink and engine and no wobble in any direction. I worked on the solar from inside the dink and I weigh 200 lbs...

On Wed, Mar 13, 2019 at 08:29 PM, Jose Venegas wrote:

I am in the process of ordering an arch for Ipanema.  After personally seeing the aluminum arch made by Atlantic Towers, from Lulu and Creamy Puff I was very impressed with the quality,  how light they were, and more importantly by the very affordable price.   However,  both owners (Marc and Mark)  mentioned that the arches were somewhat wobbly, but that was corrected to their satisfaction by adding cables or an extra-strut in a corner.  Although I have seen some very nice arches made to order, their cost , I think, is typically 3 to 4 times that of an Atlantic Tower and they seem to be much heavier.
My questions are for those who have installed arches:
0) if they were from Atlantic Towers, were they wobbly?
For this who installed stainless arches: 
1) do you have an idea of their weight? 
2) how wobbly are they when underway both with and without dink?, 
3) did you have to add extra struts or cables to make them stiffer?
4) What was the cost of manufacture and installation?
5) Can you provide a pix of your system?

Greatly appreciate your feedback
Ipanema SM2K 278
Still freezing in Boston Harbor but hopefully not for too long.


Join to automatically receive all group messages.