Re: Dessalator duo 60 warning light
toggle quoted messageShow quoted text
If I understand you correctly you disconnected both hoses from the membranes and the unit still went to the red alarm position. I assume you had no low pressure showing on the gauge, is that correct?
Or do you have low pressure in the green but the alarm light is on .
With the hoses disconnected from the membranes did water come out of either hose?
I went through the entire system last system with a problem it even stumped the USA Desalator rep.
I do have the 160, however, I might be able to help if you would reply.
Kimberlite Amel Super Maramu #376
From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Alan Grayson
Sent: Saturday, March 23, 2019 7:21 PM
Subject: [AmelYachtOwners] Dessalator duo 60 warning light
Hi All, I started my water maker for the first time and I have a problem.
i put new membranes in and flushed it with fresh water for about 15 mins. I ran sea water thru it for about 5mins then started to slowly increase the pressure while checking for leaks. Once the needle was in the green it started producing product water but after about 1 min the warning light came on and now nothing runs. I was using the 24v side. I released the pressure knob and even unhooked the pressure lines then tried again. The red warning light came straight on. I reset the 24V breaker in the engine bay and checked the 2 fuses in the control box in the lazarette. I then tried the 220v side and had the same result.
does anyone have any ideas?
SV Ora Pai, SM 406
Cat Cay Bahamas
Join main@AmelYachtOwners.groups.io to automatically receive all group messages.