Re: Now locker floor replacement

Mike Ondra

Nice detail. I’m going to leave the steel stub in the floor. After installing the PVC pipe I’ll glass it in heavily as well. If the steel eventually rots out the PVC and fiberglass should conduct the chain into the locker effectively. Anyway that’s the theory.

On May 19, 2019, at 10:27 AM, Thomas Kleman <lorient422@...> wrote:

<IMG_20190312_112250625.jpg>My thinking was that the other 3 windlass bolts were secured by large fillets to the floor and supported by the floor joint to the vertical divider. I just created a 4th fillet for the back starboard bolt that also served as a header for my 4 inch Pvc. This piece is secured under the windlass by 7 screws and 5200. It fits inside the 4 inch Pvc and allows access to the back starboard windlass bolt because the bolt goes through the header plate. 

Join to automatically receive all group messages.