1. main@AmelYachtOwners.groups.io

Re: Now locker floor replacement

Mike Ondra
 

Aletes locker drain was also blocked. Pushing a fish (wire puller) up the drain pipe from the T in the foreword head bilge broke it loose. Water gushed out along with the mud and sand. Hose pressure through the holes in the anchor locker floor cleaned out the rest. 

Key to this was the access now afforded      through the port bow locker floor now completed. 

Mike Ondra
Aletes SM240
image1.jpeg


On May 19, 2019, at 5:51 PM, Germain Jean-Pierre <jp.germain45@...> wrote:

Hi Gang,

I solved the problem by always using the chain wash (now fresh water on our boat) and at least once a year… doing a pressure wash in the chain well compartment.

Cheers from Fiji.

Jean-Pierre Germain, SY Eleuthera, SM 007


On 20 May 2019, at 09:45, Thomas Kleman <lorient422@...> wrote:

Mike- your floor looks great. I know how hard it is to cut and refine that shape. On L'ORIENT my chain locker bilge (under that glassed in perforated grate at the bottom of the chain locker) was hoplessly clogged. I ended up cutting an access port in it so I could vacuum it out periodically.....it drains fine now Wondering if other people have this problem or I just pick muddier places to anchor than most.....the actual outlet underneath there is about 15mm above the bottom and offset.

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.