- Wiring to aft head SM243
Re: Wiring to aft head SM243
Just a guess:
What about at the fill pump? The + wire could be connected in series.
- Cream Puff - SM2K - #275
cruising - Panama
main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On
Behalf Of karkauai via Groups.Io
Sent: Saturday, May 25, 2019 7:31 PM
Subject: [AmelYachtOwners] Wiring to aft head SM243
I’m hoping someone can help me figure out where to look for a break in the
connection from the aft head circuit breaker to the aft head switch. The
fill pump has power but the macerator Pump doesn’t. There’s only one +
wire at the breaker which controls both pumps, so somewhere between the breaker
and the switches, there’s a connection that splits the + into two legs to the
two pumps. I assume that’s the likely place for there to be a
unfortunately the single wire from the breaker disappears a large bundle of
wires that goes up the forward engine room bulkhead and into that huge
spaghetti bowl of wires above the galley sink. At the head switch, all
wires disappear into a chase going forward. Tracing it’s going to be a
challenge, so I was hoping someone might know where it divides into feeds to
any help greatly appreciated.
Kent & Iris
Join main@AmelYachtOwners.groups.io to automatically receive all group messages.