Re: Jib Stay Guide inside Furler



I refer to those as swivel stay bushings, but I am not sure if that is the correct term. 

During reassembly, those two plastic pieces are to be inserted around the forestay wire when it has been put in place in the swivel. Insert those plastic parts from the top of the swivel, on each side of the wire. This procedure is in my Amel Book and was contributed, in part, by Jonas & Annsofie Svanberg, owners of the very well maintained SM #232 "Lady Annila."


Bill Rouse
720 Winnie St.
Galveston, Texas 77550

On Mon, May 27, 2019 at 3:41 AM Steve Bode <Whatsup@...> wrote:
HELP. Where do these go?! I'm sure they go in the Jib furler, but I missed putting them in! 


I was sure that I would not miss how they went back in, but sure as s&%# I did! The furler is now back together and on the stay. I'm prepping to remove the stay and turnbuckle in anticipation of having to remove the furler to put these guys back in where they are supposed to be. 

Steve Bode, Captain of Sailing Vessel Intention
Currently Drydocked at ANT Yat Servis
Bodrum Marina Teknik Servisler
Neyzen Tevfik Cad. No. 5
48400 Bodrum, Mulga, Turkiye

Amel Super Maramu #117 (1994) 
+1 415-710-6659 voice/text/whatsapp

Steve Bode
Capt. SV Intention
Amel SM #117 (1994)
+1 415 710-6659 Mobile/Text/WhatsApp

Join { to automatically receive all group messages.