I had to re-rig it after I pulled the main connection point out of the
toggle quoted messageShow quoted text
boom. Sailed from from the Marquises to Tahiti like shown at the
start of the video. If you look closely you can see where it should
be connected. Now it's back to the same spot, better than original.
On 5/29/19, Mark Erdos <email@example.com> wrote:
Was the mainsheet on the boom rigged correctly to start with? It is hard to
tell on the video but it looks as though it was the forward thingy under the
boom that broke. We were warned when we purchased Cream Puff that only the
middle under-the-boom-thingy was designed to take the loads required.
With best regards,
Sailing Vessel - Cream Puff - SM2K - #275
Currently cruising - Panama
From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io]
On Behalf Of Ken Powers SV Aquarius
Sent: Tuesday, May 28, 2019 3:11 PM
Subject: Re: [AmelYachtOwners] Genoa Fair Leads
I had to do this, and filmed it.
Aquarius SM2K #262
On 5/25/19, Capt. Steve Bode <firstname.lastname@example.org> wrote:
What's the latest best answer on replacing the Genoa Fair Leads? My
are broken, one wheel is chipped. Tried taking it apart, but can't figure
out how to get the pin out of the center once the eye bolts are removed.
that center bar screwed in? At $750 a piece online, I'm not jazzed about
replacing the whole car.
Replacement car without extra hardware needed to adapt to Amel lead
Tags: Genoa Fair Lead, Genoa Track, Jib Car Lead, Jib fairlead, Genoa
Fairlead, Foresail Track
*Steve Bode, Captain of Sailing Vessel Intention*
Currently Drydocked at ANT Yat Servis
Bodrum Marina Teknik Servisler
Neyzen Tevfik Cad. No. 5
48400 Bodrum, Mulga, Turkiye
Amel Super Maramu #117 (1994)
svIntention.com <http://svintention.com/> Facebook.com/svIntention
+1 415-710-6659 voice/text/whatsapp