- Amel 54 Standing Rigging and changes to the Mainmast Lower and Intermediate Shrouds
Re: Amel 54 Standing Rigging and changes to the Mainmast Lower and Intermediate Shrouds
toggle quoted messageShow quoted text
Probably not. Rudi probably changed them before you bought her. Amel 54 #46 was made several months after #35 and had 10mm Lower Shrouds.
#46 reported to this group a failure of both lower shrouds which caused rig failure near Easter Island. You can search topics in this group for "Lower Shrouds Main Mast" to see that report.
CW Bill Rouse
Yacht School - Supporting Amel Ownerswww.YachtSchool.us
720 Winnie St
Galveston Island, TX 77550
On Thu, May 30, 2019, 7:59 AM Peter Forbes <ppsforbes@...
My Main Aft Lowers are 12mm- on AMEL 54 #035 - I imagine these are the original.
On Thu, 30 May 2019 at 13:40, CW Bill Rouse <brouse@...
I think we can assume that ACMO did this on instructions from Amel because the larger rigging wire was installed on later production 54s, and obviously ordered that way by Amel.
On hull 121 the sizes are still the original ones so 8 intermediate, 10 lower.
I have not noticed any issues with these shrouds.
I have more concern with the lower shroud on the mizzen as it is 7 mm and seems to be a bit too stretchy when sailing.
Did the OEM rigger give any reason why they beefed up the main mast rigging?
+44 (0) 7836 209730
Join main@AmelYachtOwners.groups.io to automatically receive all group messages.