Re: super maramu, vibrations generated when the engine is running

ngtnewington Newington

Hi Bill,
On the 54 there is a bolt covered in black mastic from the bottom of the C drive to the iron keel. Presumably this anchors the C drive. Is there any adjustments or anything to look out for?
Amelia AML54-019 in Gaios Paxos

On 21 Jun 2019, at 16:34, CW Bill Rouse <brouse@...> wrote:

On a C-Drives older than 1999, don't forget to check the C-Drive foot for side-to-side movement by pushing on the aft end of the foot. No more than 8-10mm. If you have more, remove the foot bolt to the ballast and replace the bushing which is made of heavy rubber hose. 


CW Bill Rouse
Yacht School - Supporting Amel Owners
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970

On Fri, Jun 21, 2019, 4:28 AM ngtnewington Newington via Groups.Io <> wrote:
Hi I am at Lakka, but moving round to Gaios this pm.
> On 21 Jun 2019, at 10:36, arthur saftlas <art@...> wrote:
> I have heard Yanmar is particularly bad with going thru mounts. Some engines do not run smoothly, some do.

Join to automatically receive all group messages.