Thank you for the tip I will check it
Jean Luc MERTZ
Le 21/06/2019 à 16:06, ngtnewington
Newington via Groups.Io a écrit :
On the 54 there is a bolt covered in black mastic from the
bottom of the C drive to the iron keel. Presumably this anchors
the C drive. Is there any adjustments or anything to look out
Amelia AML54-019 in Gaios Paxos
On 21 Jun 2019, at 16:34, CW Bill Rouse <brouse@...
On a C-Drives older than 1999, don't forget
to check the C-Drive foot for side-to-side movement by
pushing on the aft end of the foot. No more than 8-10mm.
If you have more, remove the foot bolt to the ballast and
replace the bushing which is made of heavy rubber hose.
CW Bill Rouse
Yacht School - Supporting Amel Owners
720 Winnie St
Galveston Island, TX 77550
On Fri, Jun 21, 2019,
4:28 AM ngtnewington Newington via Groups.Io
am at Lakka, but moving round to Gaios this pm.
> On 21 Jun 2019, at 10:36, arthur saftlas <art@...>
> I have heard Yanmar is particularly bad with going
thru mounts. Some engines do not run smoothly, some do.