Re: More than you ever wanted to know about Amel steering


Ann-Sofie
 

To confirm that the metal wheel is changed. This wheel is on S/Y Lady Annila, SM 232 built 1998.
image1.jpeg

Hälsningar
Ann-Sofie Svanberg


Skickat från min iPhone

6 juli 2019 kl. 12:34 skrev amelforme <jfpottercys@...>:

If you obtain any of the excellent "mail order" wheel leather kits, there were three distinctly different wheels on the Super Maramu. Two are stainless steel, one is composite. Not sure when the stainless one evolved but 1998 rings a bell but don't quote me. I believe the composite wheel on the 54 was the same on all.
When I asked Jacques Carteau why the switch to composite, he said 'weight '.
He explained the inertial loads on the chain drive autopilot are greatly reduced with the lighter wheel making it last much longer. Then he showed me linear drive to the rudder quadrant. At the end that is not attached to the rudder, the drive unit is through bolted with rubber squares about 1/4" thick. You have to look hard to see them. He explained that they absorb the 'pop' when the unit changes direction, again, making it last longer.
There are so many little details that make Amel boats what they are. Many of you that I have sold a boat to are probably smiling as you recall how enthusiastic I get when showing many of these unique details to prospects for the first time. 
Nobody builds a boat like Amel does.

JOEL F. POTTER
CRUISING YACHT SPECIALIST LLC
THE EXPERIENCED AMEL GUY
Office 954-462-5869 

On Jul 5, 2019, at 8:38 PM, Porter McRoberts via Groups.Io <portermcroberts@...> wrote:

There is a leather upholstery gentleman near vista mar in Panama. He does surprisingly good work at a very reasonable price. We got steering wheel and new seat etc for 200us. 

After that then dinghy cover, winch covers etc. 

Arnulfo 

+507 6008 0629


Porter
S/V Ibis A54-152
Moorea

Excuse the errors.  
Sent from my IPhone 

On Jul 5, 2019, at 1:38 PM, CW Bill Rouse <brouse@...> wrote:

Boat Leather is a Preferred Yacht School vendor and they have measurements for SM and 54. Contact Tom Armantrout at Tom"at"BoatLeather.com or 1-206-284-9110
<image.png>
Best,

CW Bill Rouse
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970 (If I do not have your number in My Contacts, you will go to VoiceMail. Text me in advance with your number and I'll white list it.)



On Fri, Jul 5, 2019 at 6:26 PM Alan Leslie <s.v.elyse@...> wrote:
Hi Tom
We replaced ours with a kit from these guys
http://boatleather.com/product/boatleather-wheel-covers/
You just need to measure your wheel as they show and order whatever colour you want.
The kit comes with everything you need and instructions to sew it on.
It is a slow job believe me, but worth it in the end.
Good luck.
Alan
Elyse SM437

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.