Re: Dessslator HP hoses


Yes, the Dessalator High pressure fittings are "3/8 inch JIC stainless steel fittings". JIC fittings are a type of flare fitting which is machined with a 37-degree flare seating surface.  


CW Bill Rouse
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970

On Wed, Jul 31, 2019 at 10:37 AM Oliver Henrichsen, SV Vela Nautica <oliver.henrichsen@...> wrote:
Hi All,
I ran into same problem and the hose from high pressure pump came off before i could change my hoses.
Does anybody know how these terminals are caled? What kind of connector is that?
Since I learned here that the end fittings are reusable i will order the hoses in France.
Dessalator did not give a hint that I can reuse the fittings.

Oliver A54#39

Sent from my Huawei Mobile

-------- Original Message --------
Subject: Re: [AmelYachtOwners] Dessslator HP hoses
From: "Aldo Roldan via Groups.Io"

Alan.  Would you please provide the Dessalator US rep information? I was not aware they had one.  Thank you . Aldo

A55- Araucaria 

On Jul 23, 2019, at 11:46 AM, Alan Grayson <bazgrayson@...> wrote:

Hi All, im about to order new HP hoses from the dessalator rep in the US. The end fittings are reusable and so you only need to buy the hose unless like me one of your ends are damaged.
There are 2 options for this.
1: buy the hose from France and any ends that you need. Hose $40 fittings $93.00 each, shipping $70
2: buy new hose and ends from the US. the hose is different and the fittings are slightly different with the same threaded ends. They are not interchangeable. Cost of 2 new hoses $472.00
I'm buying the hose and 1 end fitting from France.
If anyone else wants to buy either hoses or fittings from France and add to my order please let me know by Thurs 25th by noon eastern time. The order will be shipping to me in Annapolis and i'll forward from here if you pay shipping to your destination.
Alan Grayson
SV Ora Pai
Annapolis, MD

Join to automatically receive all group messages.