Re: Parasailor for Mango
toggle quoted messageShow quoted text
Thank's for your info on the Parasailor.
I have attached a photo of my bowsprit. I would not have the light weight sail up when using the Parasailor. My thought is that if the Parasailor was straight ahead I would not have any issues with the lines but if the Parasailor was Port or Starboard then the lines coming in to the bowsprit would be touching my side rails at the bow.
I am looking at a 55 on the next dock and I think your bowsprit extends out further than mine.
I would like to hear from any 54's who have a Parasailor and how they get it to work?
Currently having my 14 year old Dessalator membranes replaced by the Antibes Desolator technician. Very helpful folk. My Dessalaotor control board blew and as it is no longer available they sent it to The Netherlands for repair. I am really putting in a plug to Nicholas the son of the Dessalator founder to accept "credit cards".
Barry and Penny
"Lady Penelope II"
Amel. 54 #17
On Sunday, August 18, 2019, 11:56:15 PM GMT+2, Joerg Esdorn via Groups.Io <jhe1313@...> wrote:
Hi Barry, there have been several Parasailor threads recently. Please check out my posts on using the Parasailor with the "Tacker". If you do, you won't need a bow sprit. I don't find I need a bow sprit on the 55 even with the "standard" setup with 2 sheets and 2 guys. I run the guys over rings attached to a shackle on the anchor fitting forward of the forestay. I talked to a Swiss 55 owner before I ordered my Parasailor who had initially gotten a bow sprit and ended up not needing it. I believe your bow setup is identical to that on the 55. So I would recommend not getting one, at least initially. The boat sails fine with or without mizzen but you gain additional speed with the mizzen unless you're below 160 degrees AWA, when the mizzen will partially blanket the Parasailor. It's not necessary to deploy the running backstays for the Parasailor.
Currently parked in Almerimar