Re: OG Maramu Mizzen Sheet Cars

smiles bernard

I have also taken this approach with a machine shop
Interested to know how people approached it as originally if was an interference fit 
How did you reassemble the disk onto the pin?
As a temp measure I used a 8 or 10mm (can’t remember which) Cotter pin
Worked well and easy to lift from above. 

All the best
162 uk

On 18 Sep 2019, at 16:10, Gerhard Mueller via Groups.Io <carcode@...> wrote:

Dennis is correct.
No problem to order a machine shop for a new disk. Often the pin is still OK.
I have changed all disks.

Gerhard Mueller
Amel Sharki #60
Currently Kalamata, Greece

Join to automatically receive all group messages.