Re: Gearbox for outhaulAmel


Danny and Yvonne SIMMS
 


On 03 October 2019 at 19:48 Danny and Yvonne SIMMS <simms@...> wrote:

Hi,

Salt is all pervasive. It is gritty stuff. If you are minimal sailing with regular rainfall it is not usually too much of a problem. However major passages in the tropics puts gritty salt every where. Including the furler spinners at the top of the sails. Thorough washing with fresh water of all blocks travelers and cars and dropping all sails to wash out  the spinners will save a lot of grief. After the wash and allowing time to dry spray silicone. 

You may be amazed at the results. This includes the mizzen furler gearbox.

Danny

Sm 299

Ocean Pearl

On 03 October 2019 at 15:53 Paul Brown <feeder.brown@...> wrote:
Thanks Thomas 

 

On 3 Oct 2019, at 2:48 am, Sv Garulfo < svgarulfo@...> wrote:

Paul, 
You may want to check the block at the end of the boom too, mine and others’ were a bit seized. We cleaned it up and also ordered a replacement from Amel, as it seems to be specially adapted from the stock items. 


Best,
Thomas
GARULFO 
A54-122
Rangiroa, French Polynesia 

On Wed, 2 Oct 2019 at 06:20, Paul Brown < feeder.brown@...> wrote:
Thank you Olivier, I will slacken off a little.

I was wondering if this was causing my slow blow boom fuse to open earlier than it should, as it seems to open often 

Regards Paul 

 

On 2 Oct 2019, at 6:13 pm, Beaute Olivier via Groups.Io < atlanticyachtsurvey@...> wrote:

Hello Paul,

originally, this line is rather tight, indeed as Bill says, in order to prevent slipage. But with time, UV and salt, this Vectran-core line tends to shrink and gets tighter and tighter which puts more load than necessary on the motor itself. You should loosen a bit the small line tackle at one end of the traveller's line.

Olivier

 

 


 


 


 

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.