Re: A54 fridge circulation pump and a New Source for Marco Pumps


 

Eric 

BSP 3/8" on the UP/2



--
CW Bill Rouse Amel Yacht Owners School
Address: 720 Winnie, Galveston Island, Texas 77550 
   


On Tue, Oct 8, 2019 at 2:00 PM eric freedman <kimberlite@...> wrote:

Are those pumps a BSP thread or a NPT thread?

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Scott SV Tengah
Sent: Tuesday, October 08, 2019 1:16 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] A54 fridge circulation pump and a New Source for Marco Pumps

 

To expand on Bill's expansion :), replacing the rotor cap requires unbolting the old one and swapping out the new one.  I would get the seal kit, too. It's only 8 euro or so. Includes the shaft lip seal and a replacement bearing.

Every A54 seems to be different (!?!?) but to use the Marco on mine required me to buy hose barb adapters. I got these:

https://www.ebay.com/itm/Male-Thread-Pipe-Fitting-x-Barb-Hose-Tail-Connector-BSP-Stainless-Steel-ark/253006828611?ssPageName=STRK%3AMEBIDX%3AIT&var=552054492119&_trksid=p2060353.m2749.l2649

I got the 3/8" BSP x 15mm barb. The BSP end is for the pump and the barb end is for my existing hoses. You will need 2 of these.

 


--
Scott 
2007 A54 #69
SV Tengah
http://www.svtengah.com

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.