Re: Ground strap in bilge
I am sitting south of Barcelona. One group member put me onto a German supplier, a former AMEL owner is trying to source it out of Britain and I have been told AMEL does still have them.
Glad I joined this group.
And Bill I agree that the original are way too thin.
I love my boat,
From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> on behalf of CW Bill Rouse <brouse@...>
Sent: October 20, 2019 3:34 PM
To: email@example.com <firstname.lastname@example.org>
Subject: Re: [AmelYachtOwners] Ground strap in bilge
This is the one and only time that I will say that the Amel OEM part is not the best part.
Amel uses a thin copper foil for the bonding strap inside the gray water bilge. In terms of electrical conductivity, it is perfect. In terms of durability it is not good enough. The gray PVC float switch tube sits on top of the copper foil and will wear through the copper foil in a few years. If you buy the Amel OEM copper foil, I suggest you buy 2 because you will likely need to replace it again in a few years.
CW Bill Rouse
Amel Yacht Owners School - www.AmelYachtOwnersSchool.com
720 Winnie St
Galveston Island, TX 77550
On Sun, Oct 20, 2019, 1:34 PM Randall Walker <lladnarowen@...> wrote: