On Oct 23, 2019, at 10:25 PM, eric freedman <kimberlite@...> wrote:

As an afterthought, check the rubber hose that attaches the stove to the propane supply line.

The hose was rubbing on the stove and I was lucky to catch it before I had a problem. I have replace it with steel braided hydraulic hose and rerouted the hose to prevent disaster.

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of eric freedman
Sent: Wednesday, October 23, 2019 10:02 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Desalinator high pressure hose and fittings

 

James,

I had my hoses duplicated at a hydraulic shop in St. Maarten. They used aeroquip hose and  swage on fittings. They are much less money than the do it yourself ones that come with the watermaker.

Just make sure that the steel braid in the hose is stainless..

The hoses are usually rated at 5000 psi. Hydraulic shops make hoses for bulldozers, etc. You can find them everywhere.

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of James Cromie via Groups.Io
Sent: Wednesday, October 23, 2019 9:22 PM
To: main@AmelYachtOwners.groups.io
Subject: [AmelYachtOwners] Desalinator high pressure hose and fittings

 

Good evening everyone.  
I have a Dessalator 160L/hr, and I'd like to order a spare set of high pressure hoses with fittings. 
Online, I am finding these to be quite expensive with stainless steel JIC fittings. 
Can anyone direct me to a good vendor for these (with fittings? )

You can contact me directly at jamescromie 'at' yahoo 'dot' com in order to avoid posting any commercial information (not sure if that is against the forum rules)... 

Many Thanks
James Cromie
SV Soteria SM2K 347
Aruba 

<IMG_0053a.JPG><IMG_0057.JPG>