On Nov 7, 2019, at 9:05 PM, Porter McRoberts via Groups.Io <portermcroberts@...> wrote:

On the 230/50 panel. Port side is for items supplied by the quay/mains or generator. The starbord side is wired to the inverter. The chargers/ dive compressor,  AC, washer etc is still on the port side. 

Porter

Ibis A54-152 

Excuse the errors.  

Sent from my IPhone 

Www.fouribis.com

On Nov 8, 2019, at 2:36 PM, James Cromie via Groups.Io <jamescromie@...> wrote:

Thanks Porter.  What do you mean by “one side” for each one?  

-James

On Nov 7, 2019, at 6:22 PM, Porter McRoberts via Groups.Io <portermcroberts@...> wrote:

James. I’ve done this.its a bit of a pain but I rewired  the panel.  One side for inverter power, the other side for shore/generator power. Keeps it logical and simple with out the possibility of recurrent loops. 

Porter. 

Excuse the errors.  

Sent from my IPhone 

Www.fouribis.com

On Nov 8, 2019, at 4:36 AM, James Cromie via Groups.Io <jamescromie@...> wrote:

Hello Super Maramu or A-54 owners - 
(and particularly Scott Tengah) 

I am going to install a Victron 24V 5000W Quattro Charger/Inverter in my Super Maramu.  
As this has an internal automatic transfer switch, I am trying to figure out how to wire this unit to bypass the original Amel transfer switch.  

In any case, I would greatly appreciate any advice / input on how others have installed this unit in their Amel.  Any photos or schematics would be extremely helpful.  

Many Thanks,
James
SV Soteria
SM2K 347
Cartagena, Club Nautico (in the sweltering heat and humidity)