Re: Victron Quattro charger/inverter installation
toggle quoted messageShow quoted text
I don't think that you want to bypass the generator/shore power switch for your 220 panel, certainly not for the entire panel.
Like the 54, the SM 220 main panel has 2 buses. breakers attach to the buses. The 54 main panel is similar, but different than the SM main panel. The SM buses are independent and wired to the main 220 block inside the panel. I believe what you can do is leave the generator/shore power switch in place and wire one Main Panel bus to the generator/shore power feed, which is after the generator/shore power switch in the engine room, and wire the other bus to the output of the inverter. The difficulty will probably be moving some breakers from one bus to another to get the desired results. With 5000 watts, you will probably want washer, microwave, outlets, possibly 1 AC and possibly something else on one side. I think that you'll have to move a minimum of 2+2 breakers. You might want to make a new plexiglass face, but, at the least, you will need to relabel some breakers. I think it may also be possible to cut a bus in half, but not sure. Some 54's and 55's were made with split buses where some 220 panel breakers were automatically powered by the inverter.
I may know more in a few days. If so will come back to you.
On Thu, Nov 7, 2019 at 9:16 PM James Cromie via Groups.Io <email@example.com> wrote: