Re: Help with 220 Volt Genset exhaust fan Super Maramu



The fuse and the capacitor should be spliced in series to the load wire which should be brown. The blue wire is return (neutral). Green/yellow is earth. 

I am not sure where the black wire goes, unless it is a jumper. 

That fan (blower) is exactly the same fan (blower) on your Climma AC.

CW Bill Rouse Amel Yacht Owners School
Address: 720 Winnie, Galveston Island, Texas 77550 

On Sun, Nov 10, 2019 at 10:33 AM Thomas Kleman <lorient422@...> wrote:
Hey Eric- just changed my blower so this is still fresh. The line ahead of the transfer box is energized by the genset running (on SM 422). The hot line goes fuse, capacitor, then fan. I'm not sure about your black wire.....if that's a 4th wire coming from your fan, we don't have one so can't help there.

As an aside, due to charger overheating, we installed Hella 24 volt fan in ceiling light block over genset, pointed at charger. Switch is by watermaker panel. It resolved my charger overheating issue where new blower had made no difference.

Tom and Kirstin 
SM2K 422

Join to automatically receive all group messages.