toggle quoted messageShow quoted text
I have no doubt that you offer a great service to the anglophile Amel owners in particular. You have always been respectful to the Amel brand, indeed supportive. I am sure that Amel appreciate that, but inevitably on occasion there may be a few tensions and a few toes that get trod upon. This is normal and to be expected and requires diplomacy on all sides. I know that you are sensitive and sensible in this regard. Keep up the good work.
I hope that the spare parts department at Amel is a profit centre and believe that it is in everyones interest to keep it going. There must be a couple of thousand Amels out there!
All the best
On 14 Nov 2019, at 14:57, CW Bill Rouse <brouse@...
I posted SM 16 Tamango 2 worn rack photo. This was 29 years old and 50,000 miles. You can see the rack is completely worn out.
On Thu, Nov 14, 2019 at 7:27 AM CW Bill Rouse via Groups.Io <firstname.lastname@example.org
I have a photo of Hanspeter's old steering rack which I will post for him in Photos. His was 29 years old and about 50,000 miles.
Yes this is HP from Tamango 2
I got the chance to order the last piece of Steering material, racks and pinion from SAV. I told that to Bill and SAV will look for new mybe new sources. But; my steereing last for about 50000 nm and 29 years. I did not so much sailing because I was in the med for 20 Years.
the installation took me about 2 hours at Trinidad, with the help of Marc; Dynamic Mec. Chagarumas, Port of Spain
------ Original Nachricht ------
Am Mittwoch, 13. Nov, 2019 um 20:22, CW Bill Rouse schrieb:
I believe that the US distributor probably misstated what Ultraflex is doing, but since I am not speaking directly to Ultraflex, I cannot know for sure. Since Thierry BILLARD, manager of SAV at Amel is in discussions with Ultraflex, I feel it is improper for me to get directly involved. The answer to your question will come from an owner ordering the racks from Amel. I am sure we will know more soon.
Just to clarify, Ultraflex is committing to make one last batch of cables ONLY? What about the rack and pinion gears? From reading posts on steering failures on this forum it seems that the racks are prone to failure - even if their failure is preceded, and potentially caused by, cable failures.
SM #440 Cara
Deale, MD USA