toggle quoted messageShow quoted text
I also replaced the sensor. I was concerned that I would have to install another relay to invert the signal, but that was not necessary. The replacement unit works well.
SM Aletes #240
On Nov 8, 2019, at 11:53 AM, "heinz@..." <heinz@...> wrote:
I have the same one I get it 2 years ago and it works well.
HEINZ Sm 2000, 292
Am 09.11.2019 um 03:09 schrieb Keith Tice <amel@...>:
My chain counter recently stopped counting.
Before it stopped it was counting when we weren't looking and not counting when the anchor was moving.
I found that the Efector IB5076 induction sensor is no longer produced, but that the IB5096 is available.
The only difference in the data sheet is that the signal NPN for IB5076 is PNP for IB5096. https://www.ifm.com/ch/en/product/IB5076 https://www.ifm.com/ch/en/product/IB5096
Should this be a plug compatible replacement?
I mean, one is on a lot and turns off and the other is off a lot and turns on. It is pulsing and the counter should just be counting pulses.
What is the opinion here?
Bikini SM 282