Re: Mizzen furler

Craig Briggs

Hi Pat,
There is not an upper extrusion bearing up there - it's just the swivel that centers the furling extrusion when the sail is up. With the sail down the extrusion just bangs around freely. Same as the mainsail. Not sure from your post if you got the sail down - sounds like you did - so if it is still binding with the sail down it has to be at the bottom. 
Sounds like you're not in desperate aesthetic need to repaint so the economical choice may be to leave the masts up and work on the bottom in situ.
Fwiw, Craig

Join to automatically receive all group messages.