Re: Prop to Zinc Connection

Stephan Regulinski

Bonjour Olivier,

I carefully cleaned the prop shaft to get good measurements. I read zero Ohms between prop shaft and the prop.

But from prop shaft to zincs on the rudder I got a range of measurements between 2 and 50 Ohms, depending on movement of the propeller. I measured 0.2 Ohms from bonding wire on the C Drive to zincs on the rudder. Any idea why this could occur? Should I do something to correct?

Merci beaucoup,

Stephan Regulinski
s/v Hanalei SMM #266

Join to automatically receive all group messages.