1. main@AmelYachtOwners.groups.io

Re: A54 rudder removal

CW Bill Rouse
 

Paul,

They are installed in layers. Sometimes, replacing the first layer is all that is needed, but there is no guarantee. If you replace the first layer, it may still leak at some point in the near future. That choice is yours.

I am not sure what tools you are using to remove the packing. There are many different tools available:
image.png

I hope this helps you.

--
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
   
View My Training Calendar


On Fri, Jan 17, 2020 at 10:46 AM Paul Dowd and Sharon Brown <paul.dowd@...> wrote:

Bill,

 

After painstakingly digging out one of the existing stuffing rings I see no sign of dampness and the one I see below it seems to be in pretty good condition. As far as I know this is the first time this has been done and the boat is 12 years old. So I’m wondering if there is any point in going any further? I could just replace the one I dug out. What would be your advice?

 

And if I do need to replace all three then is there a prescribed technique for removing them? For the top one I just hacked away any which way I could!

 

Cheers,

Paul

S/Y Ya Fohi - Amel 54 #98

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of CW Bill Rouse
Sent: 16 January 2020 11:14
To: main@AmelYachtOwners.groups.io Notification <main@amelyachtowners.groups.io>
Subject: Re: [AmelYachtOwners] A54 rudder removal

 

Paul, 

 

The rudder stuffing box should be the only thing that may need attention on your 54.

image.png

 

--

CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

   

 

View My Training Calendar

 

 

On Wed, Jan 15, 2020 at 7:43 PM Paul Dowd and Sharon Brown <paul.dowd@...> wrote:

Thanks Bill, I’ll give it a try. I was wondering if there may be anything else that needs to be checked rudder-wise hence the notion of removing it.

 

Cheers,

Paul

S/Y Ya Fohi - Amel 54 #98

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of CW Bill Rouse
Sent: 15 January 2020 21:17
To: main@AmelYachtOwners.groups.io Notification <main@amelyachtowners.groups.io>
Subject: Re: [AmelYachtOwners] A54 rudder removal

 

You do not need to remove the rudder on the 54 to change the packing. You need to remove the top of the rudder post (the quadrant). Then remove the packing nut from the rudder post, remove the old packing, then insert new packing from Amel, and tighten the nut. In 90 days, you will likely need to tighten the nut again.

 

I have more detailed instructions, but considering your experience, the above will likely work for you.


--

CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

   

 

View My Training Calendar

 

 

On Wed, Jan 15, 2020 at 6:24 PM Paul Dowd and Sharon Brown <paul.dowd@...> wrote:

Hi all,

 

I want to remove my rudder to change the stuffing and do a general inspection, but have no clue as to how this is done, so would very much appreciate a point in the right direction.

 

Cheers,

Paul

S/Y Ya Fohi - Amel 54 #98

 


--
Cheers
Paul
Ya Fohi - Amel 54 #98


--
Cheers
Paul
Ya Fohi - Amel 54 #98


--
Cheers
Paul
Ya Fohi - Amel 54 #98

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.