Re: A54 bow thruster directly to battery or through main switches?
toggle quoted messageShow quoted text
That is a strange one. I would try measuring the voltage at the motor during operation to what is going on. If you lose power at the BT during your test then back track the BT wiring while operating the BT to find the fault. If you have voltage at the motor when it stops during your test then look into the motor. Maybe a relay issue? Best of luck.
On Feb 9, 2020 9:07 AM, Scott SV Tengah <Scott.nguyen@...> wrote:
Our bow thruster was indeed wired through a switch, too.
I've worked with Sleipner to try to isolate the intermittent functioning problem to no avail. It runs full speed and then stops momentarily and then will start again. No slowdown to indicate drop in voltage. The Amel joystick has been cleaned and tested and shows nearly zero ohms on activation.
Every switch and thermal protection within the Sidepower thruster has been "jumpered" and it still doesn't work. I was hoping the problem was the main battery switch but I moved the positive bow thruster supply wire from the secondary side of the switch directly to the battery side. The only thing left is the motor itself but the brushes and commutator look perfect. The annoying bit is that this motor is only a year old and Sleipner wants me to ship it back to them from Panama at my cost, wait for them to test it, get warranty approval, ship it back (at my cost) and pay customs duty. I might as well buy a new motor! With a canal appointment, I clearly don't want to do this.
Anyone have any other ideas on what I should check? I haven't tested voltage at the BT during operation because I don't have alligator clips, but the fact that the BT either runs full speed or not at all, without any slowdown indicates to me that it's not an issue with enough voltage getting to the BT.
2007 A54 #69
Join main@AmelYachtOwners.groups.io to automatically receive all group messages.