- SM Prop Shaft Seal direction and Bushing
Re: SM Prop Shaft Seal direction and Bushing
Mike Longcor (SV Trilogy)
toggle quoted messageShow quoted text
Thanks everyone for your thoughts on this. I appreciate both schools of thought here. Great diagram Bill, I'm hoping to find my current seals in this orientation. I'll report back any worthwhile findings when I do this job in April. I'm sure thorough prep and careful installation are crucial.
SV Trilogy - SM23
On Tue, Feb 11, 2020, 5:46 AM CW Bill Rouse <brouse@...
If you had a choice of:
Choice A protecting the loss of oil and destruction of the C-Drive
Choice B protecting from some seawater intrusion causing a haulout
Which would you choose?
Hello Mike, Amel recommandations is to change the seals and bushing every 700 h of use. Also recommend 2 seals protecting the oil side and one on the water side.
We before crossing the Pacific we reverse this logic since haul up facility are fare apart and if water get in here it could make a big mess in the engine room by over flowing.
(We use the shaft alternator during all crossing)
It's very important to clean well the seal seating on the water side and make sure no residue remain.
Jean Pierre Massicotte
On Sun., Feb. 9, 2020, 09:51 Craig Briggs SN 68 Sangaris via Groups.Io, <email@example.com
I suspect there is nothing new on this nor any particular consensus - it may well have migrated from engineering to philosophy ;-)
If yours is fine you may want to follow the adage of, "If it ain't broke, don't fix it". Or change it and in a couple of years add to the anecdotal evidence being accumulated.
Join main@AmelYachtOwners.groups.io to automatically receive all group messages.