Re: Recommended solar panel brand

Matt Salatino

Keep in mind, that the marketing claims made by Victron (a very good company, by the way) fit most panels on the market today.
They all have to be “Marinized”, or waterproof, as they all exist in our ambient environment. No panels are designed for “indoor only” applications.
Another thing to keep in mind:
Higher operating voltage panels are better.
Most higher output panels operate at about 35-40 volts. This makes a much more useable panel, for a few reasons. One, the panel reaches a useable charging voltage earlier in the morning. An 18 volt panel might be able to charge batteries by 11:00 am, when it’s voltage is finally higher than the battery charging voltage. A 36 volt panel will be able to reach a chargeable voltage, maybe by 8:00 or 9:00 am.
Second, moving watts through a wire at 18 volts, requires a larger wire gauge than moving those same watts at 36 volts. At 36 volts, the wire can be half the diameter. This saves weight, and money, and makes for an easier installation.
This makes the job of the solar controller important. A simple PWM controller will waste much of the energy from the panels. Always go with a good MPPT controller. They cost a bit more (Victron makes good, economical units), but are more than worth it.


On Feb 11, 2020, at 10:41 AM, Joerg Esdorn via Groups.Io <jhe1313@...> wrote:


Join to automatically receive all group messages.