- through hull forard head
Re: through hull forard head
toggle quoted messageShow quoted text
Yes that is the culprit. But the shaft seems to move. But nothing drains. I haven't heard of the shaft separating from the ball, but stranger things have happened. My next thing to try is to see if I can run a stick into the drain hole from outside. having to change out that valve will be a nasty job.
Thanks Bill see you one day in the sunny Caribe.
On Thu, Mar 5, 2020 at 6:19 PM CW Bill Rouse <brouse@...
You should be able to remove the handle, then turn with an appropriate size wrench. The stud that the not is screwed onto is flat on 2 sides. Below is a photo of the valve in the front head on a 54.
Has anyone had a 90 degree shut off valve fail to turn. The handle turns but nothing flows. I hope I have a clog/blockage near the shutoff. But it may be the pin from the handle to the ball have separated. for now I will just do pump outs, but was wondering if this has happened to anyone else. I don't know how anything could plug this but you never know what is in there.
Join main@AmelYachtOwners.groups.io to automatically receive all group messages.