Hi Mark

Never rinse the membranes with water from the Marina.

Rinse only with your own water which you have produced yourself.

Fresh water kills the membranes

Cheers Hans

SY Wasabi

Mark Erdos <mcerdos@...> schrieb am Sa., 18. Apr. 2020, 20:18:

I need a little help with water maker usage and maintenance, please.

 

Cream Puff has a 24v D60 water-maker. My problem is we seem to be going through membranes at the rate of a pair a year. I have read where others have used the same set of membranes for years and still get drinkable water. This is not the case with us. We are in our 5th year of full time cruising and are now on our 6th set of membranes.

 

When I last change membranes in Colombia, this was about March 2019. Our current membranes are just over a year old. The PPMs are starting to creep up a bit now and we have gone from the 300 range to the 500 range. We notice a change in drinking quality over 600 PPMs. This is when we usually change the membranes.

 

We run the water-maker at least once a week when in a marina, flush it with the fresh water rinse. I have a double charcoal filter set up for the tank rinse. When on anchor it is run just about every day. I am careful to watch the pressure and water making float gauge. I normally set it at 55 liters per hour and this put the pressure in lower side of the green range.

 

Any ideas why our membranes are not lasting or why our PPMs creep up?

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Tahiti, French Polynesia

www.creampuff.us