toggle quoted messageShow quoted text
We know where you hide and fully intend to visit when lock down ends.
Regarding the Duo 60/100, I’ve had exactly your experience but still end up with rusted interconnects, leaks at the end caps, rust on the HP lines although they are SS dairy industry high pressure units.
I got the new end caps made through Ocean System, a well known designer/builder of desalination plants.
I hope to clear up all my problems within the next 2 weeks.
Julie and JP, aboard SY Eleuthera, SM007, Opua, NZ
On 21 Apr 2020, at 13:19, Danny and Yvonne SIMMS <simms@...
locked down a day sail North of you but in my home on the shores of Mill Bay Mangonui.
We have the duo 60 We had one end cap split where the joining tube between the end caps enters but the 0 ring still did its job and we didn't get a spray of water. I discovered the split when changing membranes. For simplicity I took the cap to a local NZ machine shop, he identified the material and made me a new one. Having said all that we have had no leak problems and believe with careful placement of the correct size 0 rings in all situations (To be sure of size I get mine from desalator) and judicious tensioning of the through bolts ensuring even tightness I doubt you should have a problem. Wrong 0 rings and or unequal tension and there may well be issues. The through bolts do not need to be particularly tight, they are just holding the end caps in place, the 0 rings stop the water. When putting the end caps in care has to be taken to ensure the 0 ring doesn't ride up out of its groove. I put a large cable tie over the o ring to hold it close in until it enters.
On 21 April 2020 at 06:44 Germain Jean-Pierre <jp.germain45@...> wrote:
I had a pair of white end caps made by EMEK marine and these were not good. (I discarded them after just looking at them) But even from the factory, immediately after installation, the black ones leaked and were badly drilled out. Dessalator refused to replace under warranty even when supplied with photos….
I took a well turned end piece to a NZ shop and had a dozen made locally; they are done but I cannot pick them up due to lockdown…. Other Amel owners participated to a small group buy. (About 60% of Dessalator price without delivery and GST costs)
What I’m most interested in is any modifications done to the tubes, end pieces or complete replacement of the Duo 100 membrane setup to deal with too many leaks.
Jean-Pierre Germain, SY Eleuthera, SM007, NZ
Did you have white colored end caps? If you did not and have the black end caps,
what modifications did you do to the new end caps?
Amel Super Maramu #376
I’d like to address the subject of the Dessalator membrane holders. I consider them under engineered, especially the end caps. (Duo60 and Duo 100 models)
I’ve had a NZ shop replicate the end caps but due to Covid-19, I’ve been unable to pickup the parts and complete a change over.
Has anyone modified the tubes or manufactured a different type of membrane system?
Jean-Pierre Germain, SY Eleuthera, SM007, New Zealand.
On 21 Apr 2020, at 05:41, CW Bill Rouse < brouse@...
For those planning to attend the ZOOM meeting, please post questions to the Topic " ZOOM meeting technical questions" by replying to this email.
Tilo Peters will likely respond to these technical questions.