- Membrane Tube end caps
Re: Membrane Tube end caps
toggle quoted messageShow quoted text
I would highly recommend Martin Dee Jon of Dessalator. He can be reached at +34-637-890-333 or +33-607-346-511. We have always found him to be responsive and knowledgeable in the past 5 years.
Mohammad and Aty
AMEL 54 #099
On Behalf Of
Ian Townsend via groups.io
Tuesday, April 21, 2020 4:39 PM
Re: [AmelYachtOwners] Membrane Tube end caps
I have tried to use the Florida Dessalator service company called Multi-Tech. For those of us in North America, I would not recommend them at all. Did not return several calls or emails. Finally, I went to their location at Lauderdale Marine
Center. I talked to a staff member and never got any follow-up or return call. Waste of time.
I think it‘s unfair to broadcast such negative things about Desal, . Amel is still installing Desal Watermakers and I had very good experiances with SAV Dessalator. Mr Wagner jun. and his team is helpful and have a amazing knowledge about H2O makers.
So pls. we know us , be specific what was your problem with SAV. Maybe I can help you, cause I have a very good contact with Wagner
en confinité à St. Martin
------ Original Nachricht ------
Am Montag, 20. Apr, 2020 um 20:55, Germain Jean-Pierre schrieb:
Thanks. I also took the entire holder to the shop… to verify the interior measurements. I suspect the new ones will be made to a closer tolerance.
Dessalator after sales service has been non existent.
On 21 Apr 2020, at 06:51, CW Bill Rouse <brouse@...> wrote:
FYI, Dessalator originally made the membrane tube end caps out of white nylon. Emek copied Dessalator. Dessalator's choice of Nylon proved to be the wrong choice. Dessalator later made end caps from a harder material which was black. I
am not sure of what the black material is, but, in my experience is that there have been very few issues with the Dessalator black end caps.
Join main@AmelYachtOwners.groups.io to automatically receive all group messages.