Re: Zink Anode for SPURS Line Cutter
|
Hi Olivier Thank you. Yes you are completely right. I forgot that U-shaped plastic part which isolate the SPURS from the bonded shaft. Have a nice day Ruedi Von: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> on behalf of "Beaute Olivier via groups.io" <atlanticyachtsurvey@...> Antworten an: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> Datum: Sonntag, 17. Mai 2020 um 11:31 An: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> Betreff: Re: [AmelYachtOwners] Zink Anode for SPURS Line Cutter Hello Rudi and Scott, the reason for the zinc on the SPURS rope-cutter is that it is attached to the fixed blade which is in fact isolated from the prop shaft by a plastic U-shaped part (you will have a close look next time) Therefore, this fixed blade is not correctly bonded to the rudder zincs, and it is important to keep its zinc in good condition. The purpose of the plastic part is to reduce friction betwen the shaft and the fixed blade. Have a nice day. Olivier.
|
|
|