- My Plotter has stopped providing CTS information
Re: My Plotter has stopped providing CTS information
John Clanton <jclanton@...>
A few things to check:
- My 55 has a heading sensor in the forward cabin bilge storage. That is the first thing I would check. At delivery, Kevin made a point of warning us to keep any ferrous metal at least
three feet away from the sensor.
- I am not on my boat, but in looking at the manual, there is a section under initial setup that should indicate if it is receiving heading sensor information.
- Easiest way - Email Stephane at Pochon (stephane@...) with the question. Include hull number, Furuno model number.
John W. Clanton
S/V Devereux, 55, No. 65
Join main@AmelYachtOwners.groups.io to automatically receive all group messages.