toggle quoted messageShow quoted text
THX so much. Another pic, not so good, from aside view.
For more detailed enclosed view, you can it enlarge. Hopfully the space between is just right enough to fit the second fixed blade.
So I would order it from Spurs. From the US to Greece.
(Interesting and confusing is the picture shown in the Amels owners manual page 7-21, where are only a 1 set of blades shown. „semi cutter“ system?)
All the very best and THX
„SoleilBleu“ /A54 #088.
There is supposed to be 2 sets of blades. In your photo I only see one.
Could you send more photos?
Amel Super Maramu #376
you are very right, I just find a picture from last year on the hard. This may be the original Amel setup from 2008.
But the 2. blade mounting and zinc missing. And in the owners manual (for options) I also find a picture from original setup (2008) like mine.
Any comments and recommendations for clarifying are very appreciated . Thanks to all.
Best wishes and stay safe!
and Eric, good luck for your little escape :)
„SoleilBleu54“ / A54 088.
If I am not mistaken the Model of the cutter is “B”
If you contact Leean Ali at Spurs and give her your information she should be able to tell you the size you will need. Spurs also sells replacement parts and rebuild kits. I believe if you ship them your line cutter they can preform a servicing and rebuild on your line cutter and ship it back to you too.Spurs Marine Mfg.
201 SW 33 STREET
FORT LAUDERDALE FL 33315 USA
Paul currently in San Francisco
sv Aramis SM 444