Re: Spurs line cutter on Amel 54
eric freedman
Hi Ulrich, The photo did not come through. The fixed Blade has a protrusion that fits into a V cut into the oil drain plug of the “C” Drive. I believe the blades are made for the Amel system and is not stock to Spurs. Attached please, find a photo of ½ of the fixed blade which broke on my spurs unit. If you will notice the V shaped part with 2 nylon “bumpers” this is half of what is missing from your spurs. This is the part that fits into the oil drain plug. Fair Winds Eric Amel Super Maramu #376
From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of ULRICH DANGELMEYER
Sent: Thursday, May 28, 2020 3:17 PM To: main@AmelYachtOwners.groups.io Subject: [AmelYachtOwners] Spurs line cutter on Amel 54
Hi Eric,
THX so much. Another pic, not so good, from aside view.
For more detailed enclosed view, you can it enlarge. Hopfully the space between is just right enough to fit the second fixed blade. So I would order it from Spurs. From the US to Greece.
(Interesting and confusing is the picture shown in the Amels owners manual page 7-21, where are only a 1 set of blades shown. „semi cutter“ system?)
All the very best and THX Ulrich „SoleilBleu“ /A54 #088. <>
Am 28.05.2020 um 20:49 schrieb eric freedman <kimberlite@...>: There is supposed to be 2 sets of blades. In your photo I only see one. Could you send more photos? Fair Winds Eric Amel Super Maramu #376
From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of ULRICH DANGELMEYER
Hi Eric, Hi all,
you are very right, I just find a picture from last year on the hard. This may be the original Amel setup from 2008.
SPURS type B(ravo).
But the 2. blade mounting and zinc missing. And in the owners manual (for options) I also find a picture from original setup (2008) like mine. Confusing. Any comments and recommendations for clarifying are very appreciated . Thanks to all.
Best wishes and stay safe! and Eric, good luck for your little escape :)
Ulrich „SoleilBleu54“ / A54 088.
<>
Am 28.05.2020 um 00:08 schrieb eric freedman <kimberlite@...>: If I am not mistaken the Model of the cutter is “B” Fair Winds Eric Amel Super Maramu #376
From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Paul Guenette via groups.io
Hi Ulrich,
|
|