toggle quoted messageShow quoted text
I recommend US R7 Anode (zinc 7" diameter). In Europe use a 127mm anode. An M12 bolt is used to secure the anode.
On June 2, 2020 at 11:05 AM eric freedman <kimberlite@...> wrote:
I have been using the R^.
On June 2, 2020 at 10:55 AM Ryan Meador <ryan.d.meador@...> wrote:
If yours are the same as ours, they're 125 mm diameter with a hole for an M10 bolt (11 mm hole). In the US, they're available from
, where for some reason they're marketed specifically for Azimut boats, but they're the perfect size for us. The R5 is almost the right size as well, but being imperial, the hole is slightly too small and must be drilled out -- lots of people do this, but it's a pain when you can just get the right ones.
Ryan and Kelly
SM 233 Iteration
Boston, MA, USA
It's my first time to change the anodes in my SM.
I couldn't find the specification on Amel manual.
Currently Alicante, Spain