Richard,
On the Maramu, the mizzen mast is stepped at the level of the cockpit seat,
not on the aft cabin roof as for the Mango etc. I can't get to our boat
right now (it's in Mexico and we're not) but to the best of my recollection
all the wires/cables go through a robust tube under the mast between the
seat level and the cockpit deck level, which can be seen in the small center
compartment under the aft seats. The wires/cables then come out in the
center aft of the engine room, between the mizzen support struts and right
at the aft bulkhead. The radar cable on our boat originally ran through the
engine room to the forward bulkhead, then to starboard into the very forward
end of the aft companionway, then up and over and forward to the nav
station. There was a junction box on the aft bulkhead of the engine room to
splice the cable.
Dave Wallaces/v Air OpsMaramu #104

To: amelyachtowners@...
From: rfmolony@...
Date: Sat, 27 Jun 2009 21:32:53 -0400
Subject: Re: [Amel] Re: "Popeye" & Questions


























Alan,



Thanks. I will take a look.



Richard

On Sat, Jun 27, 2009 at 5:30 PM, svcharisma <svcharisma@...> wrote:

Richard,

On my Mango, the mizzen mast wiring came out behind the mirror in the aft

head. It took me quite a while to figure this out, in fact I had already

cut

the radar wires in another spot before I removed the mirror and voila.

Good

luck.

Alan Spence

sv Charisma, Mango #62

Musket Cove, Fiji

[Non-text portions of this message have been removed]






















_________________________________________________________________
Windows Live™: Keep your life in sync.
http://windowslive.com/explore?ocid=TXT_TAGLM_WL_BR_life_in_synch_062009

[Non-text portions of this message have been removed]



------------------------------------

Yahoo! Groups Links