On Behalf Of
Saturday, June 27, 2020 10:05 AM
Re: [AmelYachtOwners] A54 fridge circulation pump
Scott, I know this thread should not be used and we should create a new one. I just "lost" 2 more refrigerator pumps. I took them to a motor rebuild shop in Annapolis, and they told me they are worn beyond repair.
I saw your post about taking the leap into the brushless motor world, hoping to solve the pump dilemma. I will tell you I finally got the parts Oliver recommended - after almost 6 months. Unfortunately the motor he suggested has a 10mm diameter shaft. We need
an 8mm shaft, so I cannot use that unless I create a reducer of some sort or order a different motor.
I will try to get the controller working for curiosity, but without the ability to connect the motor to the pump, I will likely have to abandon the project and just keep buying Flojet 4106 pumps (the newer version I believe, vs 4105 series).
I did notice that March Pumps offers a centrifugal pump driven by a brushless 24V motor. Although it is a bit expensive and only suitable (in its normal non-self-priming service) for salt-water cooling where the pump remains flooded, it might be worth buying
it and using only the motor. If it works it would stop us having to buy many $100 motors that go bad in 6 months or less. The motor looks as if it will work directly with a steady 24V supply - no custom controller needed. Of course, the shaft would have to
work here as well. If we can get the shaft to mate, all we would need is a relay to turn on the pump via a 24V supply in the engine room and the Frigoboat 12V output signal.
May be worth a shot..................
Phantom A54 #44