Re: Rudder Nut


Mohammad Shirloo
 

Smart.

 

Happy Sailing;

 

 

Mohammad and Aty

B&B Kokomo

AMEL 54 #099

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of John Clanton via groups.io
Sent: Wednesday, July 08, 2020 11:01 AM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Rudder Nut

 

Bernd,

 

I saw a bright Amel owner create a suitable spanner by taking a plastic cutting board, the type used in the galley, and cutting the correct dimension in the end of it with a hack saw.  The soft plastic didn’t damage the compression nut, it didn’t cost him anything, and it worked perfectly.

 

 

John

 

Disclaimer

The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If the reader of this message is not the intended recipient, you are hereby notified that any review, retransmission, dissemination, distribution, copying or other use of, or taking of any action in reliance upon this information is strictly prohibited.

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.