Re: Any data on B&G displays

Stefan and Anne Deerberg

Sorry Bill,
everything is already reassembled but I think about to take photos next time.
I opened  the processor box, wich is right behind the B&G Hydra 2000 MFD, with the 4 screws and there you can see the little 1 amp glass fuse easily. This fuse protects all 4 display devices and the masthead unit as well.


Mobil: +49 172 7757444

On 20. Jul 2020, at 18:17, CW Bill Rouse <brouse@...> wrote:


Can you take a photo of the fuse location?

CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar

On Mon, Jul 20, 2020 at 4:01 PM Stefan and Anne Deerberg <stefan.deerberg@...> wrote:
Hi Elja!

Today we checked the processor Blackbox. There we found a 50 cent blowing out fuse.
That’s it. 
The system is working probably and we placed a spare fuse for the next failure with tape outside on the processor box.
If you got some of these problems with your new old system again, just check the fuse. After 18 years they are allowed to blow away sometimes.

Good luck 


373, lonesome in the Tobago Cays 

Mobil: +49 172 7757444

On 18. Jul 2020, at 09:40, Elja Röllinghoff Balu SM 222 <Bijorka@...> wrote:

He Stefan last week i have the same problem , i maild and fone some houers  with B&g  on the end is the processor takes the data in give it to the digital unit but not to the analog units . The think like bill the processor is after 22 jaers on the end .
I make a post in the facebook groop , i am lucky and one menber sell me his old one compleat sythem
Try it also

Best Elja
SM Balu 222

Von meinem iPhone gesendet

Join to automatically receive all group messages.