Re: Anchor washing pump model


Mark Garver
 

I did the same on mine. I tried to have the original pump rebuilt, but the cost was a tad more than just replacing it and like Tom, I added a longer hose and couldn’t be happier!

Mark Garver
SV It’s Good
SM #105
Gloucester, VA

On Aug 14, 2020, at 4:12 PM, Thomas Peacock <peacock8491@...> wrote:

Our anchor wash pump also failed about a year ago, mostly due to rust. It started to drip sea water, which ended up in the bilge by the forward head. 
We replaced it with an ITT Jabsco Hotshot 6 gallon per minute wash down pump. Great flow and pressure. It fit fairly easily, but the water ports were placed a little differently, but not too hard for a guy who really hates plumbing. 
I was never really happy with the anchor wash as a whole. I have put in a hose, connected to the anchor wash hoses in the forward port locker. It does require a person up front to clean the chain and anchor, but at least it really does get cleaned. It can also be used to wash down decks with seawater. 

Tom Peacock
SM 240 Aletes
Chesapeake Bay 

On Aug 14, 2020, at 11:43 AM, Slavko D. <slavko@...> wrote:

Hello,

I am getting used to my new boat. I need some help with model of the anchor washing pump that is not working at all.  I made some photos but didinot check at the time how clear the photos are. Now I am 100km away from the boat and I would appreciate help if someone recognise the model of the pump from the photo. As the old one looks, new would be a good solution.

Thank you for help.
--
Slavko
SM 2000
#279
<IMG_0058.jpeg>

--
Tom Peacock
SM 240 Aletes
Chesapeake Bay

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.