toggle quoted messageShow quoted text
If I remember correctly, Quelzal has a very nice installation...
A platform was added on the port side of the stern with a deployable telescopic ladder. The deployable portion rests on the back bumper to prevent the ladder moving under the stern whe loaded with a humanoid...
Jean-Pierre Germain, Eleuthera, SM007, NZ
On 22 Aug 2020, at 07:30, Danny and Yvonne SIMMS <simms@...> wrote:
Last year when I was in New Caledonia Marina I was alongside an SM that had fitted a very good fold down ladder to the stern, (not attached to the bumper) I will try and find my photos of it.
On 22 August 2020 at 03:04 "james Hosford via groups.io" <jay.hosford@...> wrote:
Ah thanks pictures I saw I thought it was fiberglass or fiberglass encapsulated wood. Oh well it was an idea
On Aug 21, 2020, at 9:07 AM, Mark McGovern <mfmcgovern@...> wrote:
Assuming you have the OEM Amel bumper, the bumper would likely just rip off the back of the boat if you tried that. It's made from some sort of foam rubber and held in place by just two M8 bolts with some fender washers. The bolts are meant to hold up the weight of the bumper and keep it in place in a compression load (bumping into a dock, etc.). They are not meant to hold the weight of a ladder and person pulling down on the bumper.
SM #440 Cara
Deale, MD USA