Re: Anchor roller


With the shaft welded the sides cannot bend inward.

CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar

On Mon, Oct 5, 2020 at 11:47 AM Jose Venegas via <> wrote:

I use the secondary anchor roller to pass the snubber or the mooring line.  The two vertical rollers serve to reduce chafe when the line is not aligned with the boat.    However, in strong wind the flat cylinder shape of the secondary anchor roller allows sliding between the snubber and the roller creating chafe and strong sounds each time the snubber slides from one side to the other.
For this reason I would like to replace the secondary anchor roller to one that includes a wedge in the center and prevents the sliding of the snubber.

What is the reason for welding the shaft?


Ipanema SM 2K  278

Join to automatically receive all group messages.