Re: Super Maramu Bimini
|
Hello My Bimini was made by a sailmaker in Greece. She also made the bimini for a friend of mine, also a SM 2000 but we added windows to the front. You just have to lift the frame a bit. You only have to raise the two stands 10 cm higher - these are only 2 new holes on the side so that you can continue to use the old frame. not visible from the outside. We took Sunbrella in sand colors. No problems so far. I can send you the mail address off the sailmaker if you want. Your Hull No. Is next to mine I have 292. Greetings Heinz SY Quetzal
Am 24.10.2020 um 15:36 schrieb Cathy & Guillaume via groups.io <carpathia3@...>:
-- Hello
Since yesterday when I tried to park in a box in a marina in Auckland my bow thruster motor failed.
If I turn the beam to the left or right the whole power supply breaks down for a moment. After that the power is back.
I took the rudder off and it can be turned perfectly by hand.
But the same happens with the engine. No power for a few seconds, all instruments off, no rotation of the motor.
Does anyone know this problem.
Does anyone know how I can find out if it's the motor or maybe a relay that doesn't work.
Can I test the motor without a relay, maybe on the 4 cables marked D1, D2, and A1, A2?
I am grateful for a quick answer. Heinz SY Quetzal, SM 2000, 292
|
|
|