toggle quoted messageShow quoted text
We furled too loosely and jammed once. We got ours loose the same way. Back and forth, tighten the furler, tighten the outhaul, loosen a bit, then repeat... a lot.
On Oct 29, 2020, at 2:04 PM, Courtney Gorman via groups.io
Start by furling as tightly as possible then streach the out haul loosen and repeat
Do as Bill says and use the winch handle, but on my previous boat (not AMEL) the furling main jammed a few times - usually when rolled too loosely. I found it helped to pull downwards hard on the leach of the sail. You may need to release or slacken the short rope on the clew first. It may help too if someone can reach up and push the sail/foil inwards (away from the mast slot). Good luck.